Skip to Content

Airpods Connected but Sound Coming from Phone

– Airpods Connected but Sound Coming from Phone –

It’s unknown what’s causing this connection problem, and Apple hasn’t admitted it’s a problem, but it’s been reported far too many times and occurs much too frequently to be deemed “normal behavior.” Regardless, there are a few tried-and-true solutions. Read to find out.

Airpods Connected but Sound Coming from Phone

Airpods Connected But Sound Coming from Phone

Turn off your phone’s Bluetooth, then turn it back on if your AirPods are linked but the sound is coming from your phone. If it doesn’t work, go to Settings > Bluetooth > Info > Forget This Device in the Settings menu. To re-pair your AirPods, press the button on the rear for 10 seconds with the lid open.

This will completely reset and re-pair your AirPods, resulting in them being linked this time.

Don’t worry if they don’t work right away; there are various additional tried-and-true methods for resolving this problem.

I’m certain you’ll be able to get your AirPods operating again if you follow the steps below.

1. Reset Bluetooth

If your AirPods are linked but sound is still coming from your phone, the first thing you should do is reset your phone’s Bluetooth.

This is the quickest solution, and it works roughly half of the time for me.

To reset Bluetooth, follow these steps:

a. Go to the Settings menu.

b. Then choose Bluetooth.

c. Wait 20 seconds after turning off Bluetooth.

d. After that, turn Bluetooth back on.

e. Reconnect your AirPods by selecting them again.

You may also turn the blue Bluetooth symbol gray by swiping down on the home screen and clicking on it (off). After 20 seconds, click the Bluetooth icon once again to make it blue (on).

If it doesn’t work the first time, you can give it another go before moving on. You may usually repair this problem by pushing your phone to try to restore a solid Bluetooth connection.

Try resetting your AirPods if the sound is still playing via your phone.

2. Reset Your AirPods

This remedy is simple, but it requires a little more effort than simply resetting your Bluetooth. The good news is that around 90% of you will benefit from this.

You’ll need to “Forget This Device” to get started. To do so, follow these steps:

a. Go to the Settings menu.

b. Then choose Bluetooth.

c. Next to your AirPods, click the information symbol.

d. Choose “Forget This Device” from the drop-down menu.

e. This will delete your AirPods from your phone successfully.

You’ll need to re-sync your AirPods now that they’ve been removed.

3. Reset Your iPhone

It’s possible that the problem isn’t with your AirPods, but rather with your phone.

Resetting your phone may be done in one of two ways. The first is straightforward: simply turn off your phone completely.

You’d be amazed how many software/connection difficulties may be resolved by just doing a power-off/power-on cycle.

This is due to the fact that a phone reboot clears the present state of your phone’s software, so any troubles you’ve had should be gone.

To turn off your phone, simultaneously press and hold the side button and either volume button (older versions of the iPhone only require you to hold the side button).

Reset Network Settings is the second method for resetting your iPhone. This operation disconnects you from any current networks and deletes any prior connections.

To reset your iPhone’s network settings, go to Settings > General > Reset Network Settings.

a. Go to the Settings menu.

b. Select General from the drop-down menu.

c. Select Reset at the bottom of the page.

d. Finally, select “Reset Network Settings” from the drop-down menu.

4. Update iPhone Software

The iPhone software is updated, upgraded, and corrected on a regular basis.

It’s conceivable that your AirPod’s Bluetooth connection with your phone is being disrupted if you’re running old or outdated software.

Make every effort to keep your phone up to date whenever possible. I propose that you enable Automatic Updates so that your phone will download these updates while you’re sleeping.

a. Go to the Settings menu.

b. Select General from the drop-down menu.

c. Select Software Update from the drop-down menu at the top.

d. Then select Automatic Updates from the drop-down menu.

e. Toggle between downloading and installing iOS updates.

f. Now choose Back to check if there are any updates available.

g. Select Install Now if an update is available.

Having the most up-to-date software guarantees that your phone performs at its best! By staying on top of things, you may avoid a lot of problems.

5. Turn Off Nearby Devices

Another option for resolving the problem is to switch off all Bluetooth devices in the vicinity. This entails really turning them off.

It’s conceivable that other phones, headphones, mice, keyboards, and other devices in the neighborhood are causing interference.

Shutting off all of those devices will ensure that this does not happen.

Alternatively, go to your iPhone and select “Forget This Device” for each of these Bluetooth devices. If you need a refresher on how to achieve this, see the definition above.

You can be certain that no interference is occurring if you do this step.

6. Turn off Automatic Ear Detection

AirPods come equipped with technology that detects when they are in your ear by default. Audio begins to be received from your device after this is confirmed.

While the technology is impressive, anything that goes wrong with this procedure will result in an incomplete connection, with sound emanating from your phone rather than your headphones.

Dirty headphones are the most common cause of this functionality malfunctioning. Built-up earwax, dirt, and filth, believe it or not, can cake over and obstruct critical sensors on your AirPods.

In fact, because your headphones are entirely obstructed, your AirPods may sound softer over time as a result of the unnoticed buildup!

I’d start by disabling Automatic Ear Detection to see whether that’s the source of the problem. Remember that once you turn this off, your AirPods will continue to play even if you remove them from your ears.

How to turn off Automatic Ear Detection

Here’s how to turn off automatic ear detection:

a. Go to the Settings menu.

b. Then choose Bluetooth.

c. Next to your AirPods, tap the Info button.

d. Toggle OFF Automatic Ear Detection by scrolling down.

Check to see whether this has resolved your issue. If it did, I’d have a good look at your AirPods and think about cleaning them as well as the charging case.

Then try turning on Automatic Ear Detection again to verify whether everything is working properly.

Even though your AirPods claim they’re “connected,” they’ll still play sound from your phone.

If this happens to you, there are a few tried-and-true solutions:

a. Toggle your phone’s Bluetooth off and then on again to reset it.

b. “Forget This Device” may be used to reset your AirPods. Then you should fix your headphones.

c. Turn off your phone and then on again.

d. Update the software on your phone to the most recent version.

e. To minimize any interference, turn off all neighboring Bluetooth devices.

f. Turn off Automatic Ear Detection and clean your AirPods if necessary.

You’re quite likely to solve this problem if you try each of these troubleshooting procedures.

READ ALSO:

Frequently Asked Questions

Go through this section for more insight and solutions into why your Airpods are connected but sound coming from phone.

1. How Can I Stop My Airpods from Connecting with Other Phones?

Ans: “Tap the “i” (information) button next to the name of your AirPods. Scroll down to “Connect to this iPhone’” and tap it.

Change the option from “Automatically” to “When Last Connected to This iPhone.” Repeat these instructions on your other devices.”


2. How to Make My Airpods Pro Sound Better on Windows 10?

Ans: “To make your Airpods pro sound better, check to see whether they’re in headset mode. Because headset mode is designed for voice transmission, it includes excessive and needless noise reduction. As a result, the resolution is quite poor.

Also keep in mind that Apple purposefully develops its gear to perform poorly with non-Apple technology in order to inflate the quality of their mediocre products.”


3. How Do You Fix One Airpod Not Working?

Ans: “If your left or right AirPod isn’t working, follow these steps:

a. Make sure your charging case is completely charged before using it.

b. Allow 30 seconds for both AirPods to charge in your charging case.

c. Place your iPhone or iPad near the charging case and open it.

d. Make sure each AirPod is charged by checking the charge status on your iPhone or iPad.”


4. What Could Cause Airpods to Make a Buzzing Sound During Use?

Ans: “If you are experiencing static noise when listening to audio or making calls with your AirPods, this could be a result of outdated software on your Apple device.

Alternatively, there could be an issue with the wireless connection between the AirPods and the source device.”


5. How Do I Correct the Uneven Sound of Earphones?

Ans: “To correct the uneven sounds of earphones,

a. Clean the headphone jack slot on a regular basis. Dirt might accumulate in the headphone jack slot over time.

b. Restart your computer (PC, Android device or IOS device)

c. Check your device with a different pair of headphones.

d. Ensure that the mesh is well ventilated.

e. Examine the wires.”


6. How Can I Connect Airpods to Windows 10?

Ans: “To do this,

a. In Windows 10, open the Settings app.

b. Choose your devices.

c. Select your AirPods under the Audio section by scrolling down.

d. Press Connect when the prompt appears. Your AirPods should now function properly.”


7. How Can I Find My Airpods Pro Case when It’s Closed?

Ans: “You may use ‘play sound’ to produce an audio signal to assist you locate your AirPods if they are in an open case. Find My app’s map shows the location of AirPods, with the choice to play sound on the left, right, or both AirPods.

Select Directions to open a map with a guide to your AirPods in both open and closed cases.”


8. Do Airpods Turn Off when You Take Them Out?

Ans: “In fact, Automatic Ear Detection is so smart that if you merely pull one AirPod out of your ear, Automatic Ear Detection will turn it off (and cease playing music via it), but the AirPods that remain in your ear will continue to play music.”


9. How Do I Connect Airpods to Zoom?

Ans: “Click your profile photo at the top-right and select Settings. Click the Audio tab in the left panel. Select your AirPods from the “Speaker” menu. This tells Zoom to use your AirPods for audio in your meetings.”


10. What Do I Do if I am Having Pairing Problems with My Airpods?

Ans: “If your AirPods aren’t working,

a. Make sure you have the most recent version of iOS on your iPhone or iPod touch, or the most recent version of iPadOS on your iPad.

b. Place both AirPods in the charging case and check that they are both charged.

c. Go to Settings > Bluetooth to check sure Bluetooth is turned on.”


We hope this resolves your airpod issue. If the problem persists, leave us a comment in the comment section while we explain better how to resolve it. Do well to share this with your community of airpod lovers.

Tech Regards!