If Your iPhone or iPod Touch Won’t Charge

– iPhone not Charging –

When your iPhone won’t charge, it’s one of the scariest and most frustrating iPhone problems. But don’t get too worked up. There are a few very common explanations for this, and they’re usually simple to address. We’ve listed possible problems and respective solutions in this article.

IPhone not Charging

Bear in mind that even something as easy as charging your phone requires a lot of elements to operate together, so to figure out who’s to blame and get things back up and running, you need to test everything one by one to remove any problems.

Don’t be concerned if your iPhone not charging stops at 80%. Optimized Battery Charging is a function seen in iOS 13 and later.

How to Fix an iPhone not Charging

If one cord charges your iPhone but not the other, you know it’s the cable. You know it’s your phone if your cable charges other phones but not yours.

When your phone charges again, determine what the last item you changed was that caused the issue so you can determine what repaired your phone.

Here are nine methods for diagnosing and resolving common iPhone not charging issues.

1. Turn You iPhone not Charging Off and Back on Again

When debugging a problem, it’s always a good idea to restart the system and see if it solves the problem. If your phone’s battery percentage life is still sufficient, restart it and attempt charging it again.

Follow the same steps to restart your iPhone as you normally would. Alternatively, go to Settings, General, and then Shut Down.

This step will not work for you if your phone battery is really low, less than 5%, or entirely dead.

Switch on your iPhone and connect the cord after a minute. Check to see if your phone is charging. If it doesn’t cure your iPhone not charging, there are a couple other options.

2. Verify that Your Phone Is Not Charging

To begin, ensure that your phone is not charging. Connect your phone as you normally would to charge it wirelessly, using an AC adapter, or via a computer’s USB connection, and check the display.

If the battery is already dead, charge it for at least two hours before checking on it.

A lightning bolt should appear in or near the battery symbol in the top right corner of the iPhone’s lock screen. iPhone not charging occurs if there is no lightning bolt visible.

READ ALSO:

3. Don’t Charge It Wirelessly

Let’s simplify our troubleshooting by removing wireless charging as an option straight away if you have an iPhone X or later that supports it, or if you have a wireless charging cover for an older model iPhone.

If you’re using a wireless charging case, remove it and use a Lightning cable to connect the phone to a power source. Check to see whether it’s charging once again.

If that’s the case, you’ve fixed the problem. The phone’s wireless charging technology appears to be malfunctioning.

You may need to take your phone to an Apple shop for servicing (or to replace your wireless charging cover), but you may keep it charged in the old-fashioned manner, with cables, in the interim.

4. Check Your iPhone not Charging Lightning Port

IPhone not Charging

If your phone isn’t charging as it typically does, check the presumed clean Lightning port first. This happens far more frequently than you may believe.  After all, we spend a lot of time squeezing the phone’s port-end first into dusty pockets, purses, and other lint-filled spaces.

Look carefully for anything, and if you find it, gently remove it using a toothpick or any other non-metallic, pointed object that will fit in the port. If you have a can of compressed air on hand, use it to blow to clean the port for a few seconds.

Recharge the phone if necessary. If it still doesn’t work, go to the next stage in the troubleshooting process.

5. Inspect Your Cable

You’ve probably seen a damaged or frayed cable on an “iPhone not charging” if you’ve owned it long enough. The rubberized outer sheath cracks from continuous bending, exposing the wires.

If your cable looks like that and isn’t charging your smartphone correctly, toss it out and purchase a new one.

However, lightning cables are subjected to a lot of abuse, and issues aren’t always visible to the human eye. Wires can sometimes break while still inside the sheath.

Inexpensive third-party Lightning cables have also been known to quit operating on their own, usually because of a broken power regulator chip inside the cable.

Because there’s no way to see any of this visually, the best way to test your Lightning cable is to try a different one, ideally one that’s brand new and properly allowed by Apple.

6. Check Where Your Phone Is Plugged In

You should also check your power supply, which is on the long list of issues. If you’re using a computer’s USB ports to charge your iPhone, check to ensure you turned the computer on (not in sleep or hibernation mode).

Also, if the USB port you were using failed, try another USB port. Don’t use a USB port integrated into a keyboard or a USB adapter to charge it; instead, connect it directly to a USB port on the computer.

If it still doesn’t work, use an AC adapter like the one that comes with your iPhone to connect it straight into a power socket.

If you’ve been using an AC adapter the whole time, try borrowing one from a friend with an iPhone or using the one that comes with an iPad.

7. Check for iPhone not Charging Software Updates

Check for Software Updates

It’s possible that your phone isn’t charging because you’re not running the most recent version of iOS. When your phone works well, software updates may not seem significant, but they may help avoid a variety of problems and even enhance performance.

If software flaws cause your charging troubles, upgrading your smartphone may be the solution.

Here’s how to check for and install updates on your iPhone:

a. Select General from the Settings menu.

b. Select Software Update from the drop-down menu. Your iPhone will now look for the most recent iOS update.

c. Tap Install Now if an update is available.

8. Try Resetting and Restoring Your iPhone not Charging

When you’re having iPhone not charging problems, a factory reset might occasionally assist.

A reset will restore it to its factory default settings, presumably resolving any issues you may be experiencing. This is a last-ditch effort to resolve the problem on your own, and it’s worth a shot.

9. Take Your iPhone not Charging in For Service

If none of these troubleshooting techniques restores your phone’s functionality, there’s a good chance that something is wrong with the iPhone itself.

For servicing, contact Apple or visit an Apple shop.

We confine the solutions provided here to software and hardware issues with your cable and adapter. The only option if your iPhone’s charging cable port is damaged is to call Apple Support, or an allowed technician.

If your iPhone stops charging at 80 percent, it’s possible that the battery has overheated. As a result, iOS disables charging capability for safety reasons. It’s also possible that it’s due to Optimized Battery Charging.

If you see an “Accessory isn’t supported” notice on your iPhone, consider using an Apple Certified cable and adapter.

How to Restart/Reset Any Model for iPhone not Charging Issues

How to Restart/Reset

If you have a strange problem with your iPhone, such as the sound not working, applications crashing, or you being unable to make calls, the first thing you should do is restart it.

This will update your iPhone’s software and, most likely, correct whatever is wrong.

If your iPhone has become so messed up that you can’t even restart it, a force restart will suffice. Even if your iPhone is frozen, this approach “forces” it to switch off.

Here’s how to restart or force a restart of any iPhone, as well as what to do if it doesn’t work.

READ ALSO:

How to Restart an iPhone

The specific procedures for restarting your iPhone can vary depending on the model.

Quick tip: they also know the Power button as the Lock button or the Side button.

For iPhone X, iPhone 11, iPhone 12, or iPhone 13

For the iPhone models listed above, do this:

a. Press and hold the Power and Volume buttons at the same time.

b. Drag the slide to power off slider to the right when it displays at the top of the screen.

c. Wait a few seconds for the iPhone to shut down entirely for the screen to go black.

d. Hold down the Power button press until you see the Apple logo.

For iPhone SE, iPhone 8, or a previous iPhone model

For the iPhone models listed above, do this:

a. Hold down the Power button.

b. Drag the power off slide to the right when it appears at the top of the screen.

c. Wait for your iPhone to switch off completely for the screen to become dark.

d. Hold down the Power button until you see the Apple logo.

Quick tip: It may restart any iPhone model by opening the Settings app, pressing General, and then choosing Shut Down.

How to Force Restart an iPhone not Charging

When your iPhone freezes, it may be unable to display the power button. You’ll have to “force” your iPhone not charging to restart in this scenario.

Don’t worry, it will not harm your iPhone. If you were working on a project, be aware that this may likely destroy any unsaved data.

Again, depending on the iPhone you have, the processes will vary.

For iPhone 8, iPhone SE (2nd generation), iPhone X, iPhone 11, iPhone 12, or iPhone 13

For the iPhone models listed above, do this:

a. Press and hold the Volume Up button for a few seconds, then press and hold the Volume Down button for a few seconds.

b. Hold down the Power button.

c. Hold the Power button down until you see the Apple logo.

For an iPhone 7

For the iPhone 7 model, do this:

a. Press and hold the Power and Volume Down buttons at the same time.

b. Continue to keep the buttons down until you see the Apple logo.

For an iPhone SE (1st generation), iPhone 6, or Earlier

For the iPhone models listed above, do this:

a. Press and hold the Power and Home buttons at the same time.

b. Continue to hold both buttons down until you see How to Type Emojis on Your Mac with a Keyboard Shortcutthe Apple logo.

How to Reset an iPhone not Charging

If your iPhone still won’t turn on after being reset and forcibly restarted, there’s a more serious problem at hand. Some files or software may be corrupted, which means they will always create a problem.

Giving your iPhone a factory reset is your best bet for resolving these difficulties. A factory reset will delete all of your iPhone’s data and return it to the state it was in when you first got it, as if it had just come out of the factory.

This may seem drastic, but it’s a great technique to cure almost any software problem.

How to Factory Reset Your iPhone to Wipe Its Data

You may restore your iPhone’s factory settings and wipe all of the data saved on it. If you’re having problems with your iPhone, such as freezing or glitching, resetting it to factory settings may help.

If you’re selling or giving your iPhone away, you’ll want to reset it so that all of your personal data is erased.

Resetting your iPhone to factory settings restores it to the state they gave it when you bought it: no contacts, playlists, photos, password memory, or anything else you’ve added since then.

However, before you reset your iPhone, make a backup of all your data to ensure that you don’t lose any vital information. After you’ve reset your iPhone, you may restore it using your backup.

Here’s how to factory reset your iPhone while also backing up your info.

a. Go to settings

b. Click on General.

c. Go to Apple Id information

d. Scroll down to factory reset iPhone.

e. Input Apple password

f. Click OK.

Fixes for Disabled iPhone Face ID

Fixes for Disabled iPhone Face ID

Face ID is typically simple to use and prevents unauthorized access to your phone. It may also secure Google Drive, WhatsApp, and other third-party apps. If Face ID isn’t working on your iPhone or you’re getting a “Face ID has been disabled” message, that’s cause for alarm!

Fortunately, there are various options for resolving these concerns. Let’s look at what you can do to resolve the problem, and figure out why you’re getting the error.

READ ALSO:

Why the Face ID disabled error on iPhone?

It might be because of a hardware failure or a software fault. They made face ID up of a lot of different components. The module is easily broken and difficult to fix.

When a phone is dropped in water, the facial recognition hardware is usually broken. It can also happen because of physical damage, such as dropping the iPhone.

Improper display replacement or repair can also cause face ID problems. Genuine Apple parts will service your iPhone.

Always double-check whether Face ID is working. Because of technical difficulties, the facial recognition feature may occasionally cease operating. Continue reading to learn how to repair Face ID.

Steps to Fix Non-Functional Face ID on iPhone

I’ve compiled a list of the most effective methods for repairing Face ID on my iPhone. One solution listed below should assist you in resolving the issue.

1. Restart your iPhone

We can resolve many troubles with the iPhone with a fast reset. All programs and processes will restart when you restart, resolving any small issues. It’s also a good idea to restart your gadget every now and again.

If you’re not sure how to do it, see our guide on restarting your iPhone.

2. Disable Face ID and enable again

Deactivating and re-enabling it may restart face ID. It’s almost as if you’re on a power cycle. Disable iPhone Unlock by going to Settings -> Face ID & Passcode -> Use Face ID -> Disable iPhone Unlock.

Now restart your iPhone and enable Face ID by following the instructions below:

a. Open Settings

b. Passcode & Face ID Check to see if Face ID is active. Otherwise, move on to the next section.

3. Reset Face ID on iPhone

It’s possible that a Face ID software flaw is to blame. It’s preferable if you clear and reset your existing face data. By resetting your Face ID, you may do so. Here’s how to do it:

a. Open the Settings menu.

b. Choose Face ID and Password.

c. Reset Face ID by pressing the Reset Face ID button.

Follow the on-screen directions to register your face on your iPhone once more. After that, lock your phone and test Face ID.

4. Ensure Face ID Is Not Obstructed or Physically Damaged

Sure, it may seem insignificant, but it’s worth double-checking that nothing is blocking your iPhone’s True Depth front camera.

If you’ve got a screen protector on, make sure it’s not blocking the sensors. Also, look for any dust or lint that has gathered.

Specialists claim that if the Face ID circuit is exposed, it is vulnerable to water damage. They commonly shorted circuits as a result of liquid damage. Therefore technicians should make sure the machine is completely enclosed.

Also, if your iPhone’s Face ID isn’t working, make sure nothing is hiding your face. Keep your lips, eyes, and nose in full view of your device’s front camera.

When wearing a mask, you may also set up an alternate look to use Face ID.

5. Update iOS

Build-specific flaws can also cause face ID difficulties. In such circumstances, an iOS update may assist in the problem’s resolution.

a. Go to Settings General Software Update to see if the update is available for your device.

b. Download it if it’s available.

6. Put iPhone in DFU Mode

On a Mac, DFU (Device Firmware Update) mode is comparable to Recovery Mode.

It’s helpful for troubleshooting and resolving iPhone difficulties. DFU mode can also repair botched software upgrades.

So, make a backup of your iPhone and restore it to DFU. All the code has been removed, and all software concerns have been resolved. If you’re not sure how to put your iPhone into DFU mode, check out our tutorial.

After that, check to see if Face ID is working. If this is not the case, move on to the next step.

7. Reset All Settings on iPhone

You can try resetting all of your iPhone’s settings. All current settings, including Wi-Fi passwords and website login data, will be erased, but your media (pictures, videos, and contacts) and contacts will remain intact.

a. To transfer or reset your iPhone, go to Settings > General > Transfer or Reset iPhone

b. Now, hit Reset All Settings, and then, if you have one, input your iPhone Passcode and press Confirm.

8. Factory Reset your iPhone

You may factory reset your iPhone as a final resort. Back up your iPhone before restarting it. You won’t have any problems recovering the device this way.

The Reset should fix corrupt applications and services.

Choose Setup new iPhone after a factory reset. Check if your Face ID is working by entering your face information.

9. Reach out to Apple Support

If none of the steps above worked, you’re out of luck. Request a resolution from Apple Support. If your iPhone is still under warranty, Apple will repair Face ID for free. It’s possible that you’ll have to pay a little price for AppleCare+.

Note: Apple’s Face ID replacement costs a fortune. To replace Face ID on the iPhone 12 Pro Max, they quoted more than half the phone’s worth. As a result, it is preferable to get a new iPhone in this situation.

How to Fix a Bad iPhone Proximity sensor 

When you pick up a call and place it on your ear, the proximity sensor helps to switch off the screen.

If your iPhone’s proximity sensor is giving you problems, fix it as soon as possible, since it can create a lot of problems, such as unintentional touches when receiving calls.

Before I go into how to fix a proximity sensor that isn’t working, let’s look at why it is such a crucial physical component in an iPhone.

What Is a Proximity Sensor?  

Proximity Sensor

A proximity sensor allows you to identify adjacent items without actually touching them. They utilize optical proximity sensors in iPhones.

For instance, I’m sure you’ve seen that when you pick up a phone call and place it to your ear, the screen turns off.

This is to avoid inadvertent contact when on the phone. It has other uses as well, although it’s most commonly used to turn off the screen when on a call.

As a result, if your iPhone’s proximity sensor stops working, it may be rather annoying! Continue reading to find out how to solve it.

How to Fix iPhone Proximity Sensor Not Working

The following steps will guide you on how to fix a bad proximity sensor.

1. Restart Your iPhone

Restarting the iPhone is our go-to remedy for most issues, because it fixes fundamental errors and malfunctions. It may appear simple, yet it is quite effective.

Because there are so many distinct iPhone models, the procedure of restarting them varies. Read our guide to restarting an iPhone model if you don’t know how.

2. Clean the Screen of Your iPhone

The proximity sensor is positioned at the top of the screen, and if you haven’t cleaned your screen in a while, now is a good time to do so. The proximity sensor is tiny, and dust gathered over time might be one cause of the issue.

Clean the display with a clean cloth, ideally a microfiber cloth, especially at the front camera region, where the proximity sensor is located.

READ ALSO:

3. Remove the Screen Protector and The Case 

If the aforementioned procedure fails to resolve the problem, the next obvious step is to remove the screen protector. While it’s unlikely, it’s conceivable that the screen protector will interfere with the proximity sensor’s operation.

Whether you’re using a case that covers the display or the region surrounding it, consider removing it and seeing if the issues remain.

4. Update to the Latest IOS Version

They designed updates to software to fix bugs and provide new features to the current release. They do, however, occasionally introduce issues instead of features. A faulty software update might be the source of a proximity sensor problem.

This problem is normally fixed quickly by Apple, and you should have gotten a software update for it. Make sure your iPhone is running the most recent stable version of iOS.

5. Using an iPhone with a Cracked Screen?

You took off the screen protector and discovered that your iPhone’s screen is cracked? The fractured glass in this case may be interfering with the proximity sensor’s performance.

When your screen is shattered, what do you do? You can either get rid of it or come to terms with it. However, in this situation, we recommend that you get it replaced, since this may resolve the proximity sensor problem.

6. Contact Apple Support  

So, if nothing else works, you’re left with just one choice: call Apple support. You don’t have to be concerned if your device is still under warranty or if you have AppleCare Plus. To contact Apple support, see this page.

That concludes our discussion.

We hope this tutorial has assisted you in resolving your issue. We also hope you learned something new in this section.

FAQs on iPhone not Charging

Go through this section for direct answers to questions on why your iPhone is not charging.

1. Can You Charge Your iPhone at An Apple Store?

Ans: “At an apple store, you certainly can. If you tell an associate you need a charge, they’ll either let you use the charger from a demo phone or direct you to the support desks, where there are lots of charging choices.”


2. How Do You Fix an iPhone that Won’t Charge?

Ans: “To fix an iPhone that won’t charge, do this:

a. Hard Your iPhone should be reset.

b. Examine your lightning cable for any signs of wear and tear.

c. Attempt to use a different iPhone charger.

d. Clean the gunk out of the charging port on your iPhone.

e. Restore your iPhone by entering DFU mode.

f. Your iPhone needs to be repaired.”


3. What Should I Do if My iPhone Is Stuck on The Apple Logo?

Ans: “If your phone is stuck on the Apple logo, do this:

a. Your iPhone will require a hard reset.

b. Start by putting your iPhone in recovery mode.”


4. Will Wireless Charging Work if The Phone Is Completely Dead?

Ans: “You must replace A fully dead battery. A fully dead battery shows that its chemistry has failed and that it will never accept a normal charge again.”


FAQs on How to Clean Charging Port

Read this section to know how to clean the charging port of your iPhone.

5. Why Won’t My iPhone Charge When Plugged Into My Computer?

Ans: “If your phone charges normally with a conventional charger, the problem might be with your computer’s USB port.

Check whether the data cable is correctly attached or broken if your phone’s charge indicator is off and no message confirming that a USB cable has been connected is shown.”


6. My iPhone Charger Keeps Going on And Off? Why?

Ans: “It’s unavoidable; your iPhone is likely to get stuffed into trouser pockets, jacket pockets, bags, and other places, so the ports will accumulate dust and lint.

So, if your iPhone keeps disconnecting from the charger, look for any clumps of dirt or lint.”


7. How to Clean My iPhone Speakers and Charger Port?

Ans: “When it comes to cleaning your iPhone charger port and speakers, the Pureport 6-in-1 multitool is your best choice.

Clean pollutants from the Lightning port using Tools 1-3, and brush lint and fluff from the speakers, mic, and other surface elements with Tool 6 and the microfiber cloth.”


8. Can You Update an iPhone with Less than 50% Battery Life?

Ans: “The answer is still, if you mean 50 percent charge remaining. You may either connect it to a power source and update it over the air, or you can connect it to a computer and update it via iTunes (which also powers the phone).

The limitation is in place for a reason: to prevent the phone from dying in the middle of an update, which would likely result in the phone being unbootable.”


FAQs on iPhone not Charging when Plugged In

This section reveals practical solutions to your iPhone not charging when plugged in problems.

9. Why Doesn’t My iPhone 13 Charge when It Says It’s Charging?

Ans: “If your iPhone still won’t charge although it shows it is, try a new Lightning cable. It’s possible that the problem is with your Lightning cord rather than your iPhone.

Try a new charging method while you’re at it. A wall charger, a USB port on a laptop, or a vehicle charger are all viable solutions.”


10. What Is Optimized Battery Charging on The Apple iPhone?

Ans: Optimized Battery Charging, which is included in iOS 13 and later, is meant to decrease battery wear and extend battery life by lowering the time your iPhone is completely charged.

Sometimes, when the function is activated, your iPhone will postpone charging over 80 percent.”


We hope you found what you were looking for in this article. Do well to share this with your friends and loved ones using the share buttons on this page.

Best Regards!

Be the first to comment

Leave a Reply

Your email address will not be published.


*